Filter
Top Products
Assembly 35
15914 (Rev. 5/11/2007)
OPTIONAL CHECK CHAIN INSTALLATION
Attach chain (9) to cutter mast plate (2) with bolt (1),
washer (3) and nut (4) as shown. Repeat for opposite
mast plate.
Attach one check chain bracket (7) to each side of the
tractor top link bracket (6) with bolt (5) and nut (8) as
shown.
The check chains may be adjusted to set the front cut-
ting height of the cutter.
Figure 28. Optional Check Chain Installation
9
8
7
6
5
4
3
2
1
CD3826
1. 5/8 x 2-1/4" Bolt
2. Cutter mast plate
3. 5/8" Flat washer
4. 5/8" Hex lock nut
5. 3/4 x 6" Bolt
6. Tractor top link bracket
7. Check chain bracket
8. 3/4" Hex lock nut
9. 3/8" Chain, 32-link