Filter
Top Products
Specifications
AFG3000 Series Quick Start User Manual
79
Specifications
This section contains the specifications for the AFG3000 Series Arbitrary/Function Generators. All specifications are
guaranteed unless noted as “typical”. Typical specifications are provided for your convenience but are not guaranteed.
Specifications that are marked with ✔ symbol are checked in Performance Verification section of the service manual, an
optional accessory.
All specifications apply to the arbitrary/function generator unless noted otherwise. These specifications are valid under
three conditions:
■ The arbitrary/function generator must have been calibrated/adjusted at an ambient temperature between +20 °C and
+30 °C.
■ The arbitrary/function generator must have been operating continuously for 20 minutes within the specified operating
temperature range.
■ The instrument must be in an environment with temperature, altitude, and humidity with the operating limits described
in these specifications.
Electrical (except AFG3011)
Operating Mode
Run Mode Continuous, Modulation, Sweep, and Burst
Burst Count 1 to 1,000,000 cycles or Infinite
Internal Trigger Rate 1.000 μs to 500.0 s
Waveforms
Standard Sine, Square, Pulse, Ramp, More (Sin(x)/x, Noise, DC, Gaussian, Lorentz, Exponen-
tial Rise, Exponential Decay, and Haversine)
Arbitrary Waveform AFG3021B/AFG3022B AFG3101/AFG3102 AFG3251/AFG3252
Waveform Length 2 to 131,072 2 to
16,384
>16,384
to 131,072
2 to
16,384
>16,384
to 131,072
Sampling Rate 250MS/s 1GS/s 250MS/s 2GS/s 250MS/s
Resolution 14 bits
Non-volatile Waveform Memory 4
Frequency AFG3021B/AFG3022B AFG3101/AFG3102 AFG3251/AFG3252
Sine
1
1 μHz to 25 MHz 1 μHz to 100 MHz 1 μHz to 240 MHz
Square 1 μHz to 12.5 MHz 1 μHz to 50 MHz 1 μHz to 120 MHz
Pulse 1 mHz to 12.5 MHz 1 mHz to 50 MHz 1 mHz to 120 MHz
Ramp, Sin(x)/x,
Gaussian, Lorentz,
Exponential Rise,
Exponential Decay,
Haversine
1 μHz to 250 kHz 1 μHz to 1 MHz 1 μHz to 2.4 MHz
Arbitrary
2
1 mHz to 12.5 MHz 1 mHz to 50 MHz 1 mHz to 120 MHz