Tektronix 071-1631-04 Portable Generator User Manual


 
Operating Basics
AFG3000 Series Quick Start User Manual
53
Amplitude
To set the CH1 amplitude and CH2 amplitude to the same level, follow these steps:
Frequency (Period)
To set the CH1 frequency and CH2 frequency to the same value, follow these steps:
1. Push the front-panel Amplitude/High
shortcut button.
2. Push the -more- bezel button.
3. Page two of Amplitude/Level Menu is
displayed.
You can set the CH1 and CH2 amplitude
to the same level by selecting On in the
second bezel menu from the top.
1. Push the front-panel Frequency/Period
shortcut button to display the
Frequency/Period Parameter Menu.
2. You can set the CH1 and CH2 frequency
to the same value by selecting On in the
third bezel menu from the top.
1
2
3
2
1