Filter
Top Products
Getting Acquainted with Your Instrument
AFG3000 Series Quick Start User Manual
27
Default Setup
When you want to restore the instrument settings to the default values, use the front-panel Default button.
Quick Tips
■ The AFG3000 Series Arbitrary/Function Generators Programmer Manual describes the default setup settings in detail.
This manual is available on the accompanying CD or at www.tektronix.com.
■ The front-panel Default button does not reset the following settings:
■ Language option
■ Power-on settings
■ System related settings (display contrast, screen saver, click tone, and beeper)
■ Saved setups and arbitrary waveform data
■ Calibration data
■ GPIB and Ethernet setups
■ Access protection
1. Push the front-panel Default button.
2. A confirmation pop-up message
appears on the screen.
Push OK to recall the default settings.
Push Cancel to cancel the recall.
3. If you select OK, the instrument dis-
plays a 1 MHz frequency, 1 V
p-p
ampli-
tude sine waveform as the default
setup.
1
2
3