Filter
Top Products
Getting Started
6 AFG3000 Series Quick Start User Manual
Before Installation
Inspect the arbitrary/function generator carton for external damage. If the carton is damaged, notify the carrier.
Remove the arbitrary/function generator from its package and check that it has not been damaged in transit. Verify that the
carton contains the instrument and its standard accessories. Refer to Standard Accessories on page 7.
Operating Requirements
Environmental
Power Supply Requirements
1. Place the instrument on a cart or
bench, observing clearance require-
ments:
■ Sides: 50 mm (2 in)
■ Rear: 50 mm (2 in)
2. Before operating, ensure that the
ambient temperature is between 0 °C
to +50 °C (+32 °F to +122 °F).
CAUTION. To ensure proper cooling, keep both sides of the instrument clear of obstructions.
Output
USB
Memory
USB
Memory
AFG
3102
1GS/s
100MHz
DUAL CHANNEL
ARBITRARY/FUNCTION GENERATOR
InputOutput Output
Channel
TriggerTrigger
View
Ch2
Ch1
Run ModeFunction
Sine
Leading/TrailingDuty/Width
Sweep Burst
Edit
Utility
Save RecallMore...
Arb
Pulse
Ramp
Square
Continuous Modulation
Default
Help
Offset/Low
Frequency/Period Amplitude/High
Phase Delay
156.3 mm
329.6 mm
Source Voltage and Frequency 100 V to 240 V, 47 Hz to 63 Hz
or 115 V, 360 Hz to 440 Hz
Power Consumption Less than 120 W