Filter
Top Products
Quick Tutorial
AFG3000 Series Quick Start User Manual
3
Quick Tips
■ Use the front-panel shortcut buttons to quickly select a waveform parameter. See page 26 for usage of shortcut buttons.
■ You can also specify a waveform parameter by using bezel menu selection. This method does not use the front-panel
shortcut buttons.
■ When you specify a waveform parameter using the shortcut buttons or bezel menu selection, an active parameter is
displayed in green in the graph area. (See step 8 above.)
7. The Frequency/Period/Phase Menu is
displayed and Freq is selected. You
can now change the frequency value.
8. To change the frequency value, use the
keypad and Units bezel buttons.
For example, if you enter a value "2"
using the keypad, the bezel menus will
automatically change to Units.
After entering the frequency value, push
the Units bezel button or the front-panel
Enter button to complete the entry.
You can change the Amplitude, Phase,
and Offset values in the same way.
9. You can also change the frequency
value using the general purpose knob
and the arrow keys.
To increase the value, turn the knob
clockwise.
To change a specific digit, select it by
pushing the arrow keys. Then change it
by turning the knob.
7
8
9