Filter
Top Products
frequency with additional button presses. Note: After 3 seconds, seek
mode is re-enabled.
H. Scan Functions
automatically scan to the next higher station, play that station for a few
seconds, then scan to the next higher station. To stop scanning and
continue listening to the current station, press scan button a second
time. Note: the radio remains in scan mode until the scan button is
pressed a second time or one of the tune buttons is pressed.
I. Preset Scan Function
preset station will be selected and be played for 3 seconds while the
-
tion, press the auto button (16) a second time. Note: preset scanning
continues unless you press the auto button (16) or either preset button
(P1-P6) to cancel.
J. Local/Distance Function
mode. When “LOCAL” is displayed, only the strongest stations will be
Note: in the default mode (no LOCAL dis-
play), all usable stations will be selected during seek or scan.
K. Changing Tuner Frequency from US to Europe
Europe tuning steps, use the switch on the bottom of the unit. With the
unit disconnected from the power source, use a screwdriver to slide the
switch to the desired position. Note: power must be removed from
the radio, or the reset switch must be pressed before the new fre-
quency mode is activated.
22.4 SunSound Stereo Receiver Troubleshooting
A. Unit will not turn-on
• Yellow memory B+ line (1A fuse); Red ACC line (10A fuse).
• With hot tub power off, use a thin rod to press the reset button
located under the front panel.