• The maximum temperature for which the hot tub can be set is
• Setting the thermostat at maximum will not accelerate the heating
process. This will only result in a higher ultimate temperature.
• The heater operates until the water reaches the programmed “set
temperature”, then turns off. The heater will reactivate after the
8. Place Cover On Hot Tub
• Keeping the insulating cover in place anytime the hot tub is not in
use will reduce the time required for heating, thereby minimizing
operating costs.
• The time required for initial heat-up will vary depending on the
starting water temperature.
DANGER:
carefully before entering hot tub!
Decontamination Procedure (Steps 9-15)
Steps 9-15 below are only required when sanitizer levels are unstable
after performing steps 1-6 above.
levels remain stable at
after performing steps 1-6 above.
CAUTION: Never add Chlorine Tablets (Trichlor) to your
hot tub for any reason! This chemical may damage
components within your hot tub and void the manufacturer
warranty.