Filter
Top Products
(DOWN) button to adjust the duration in increments of 15 min-
utes.
DISPLAY) button to save changes and recall the main
water temperature display. Note: If no button is pressed within 30
seconds, all changes are recorded and the screen automatically
returns to the standard water temperature display.
displays the following message:
(CYCLE) button then
moving through the menu by pressing either (CYCLE) or
(SELECT) button. The programming is changed only by pressing
(UP) or (DOWN) buttons during this process.
12.3 Adjusting Time of Day
The Sentry control system remembers the time of day even in the event
of a prolonged power outage. However, it may occasionally be neces-
Time Zone you will want to reset the time for your own time zone. (The
system will automatically adjust to and from daylight savings time.) To
accomplish this, press (DISPLAY) , (MODE) and (DIS-
PLAY)
decrease each time (UP) or (DOWN)
seconds. Then, press (DISPLAY) button again to display the min-
utes. Adjust the minutes as necessary by pressing (UP) or (DOWN)
button. After 5 seconds, the display will return to normal and save
your settings.
12.4 Main Control Panel Lock
To help prevent unauthorized use of your hot tub, the Sentry con-
controls on the panel.
•
DISPLAY) ,
(MODE) and (UP) buttons within five seconds
LOCKEDLOCKED
1*
according to which
filter cycle is being pro-
grammed.