-
certain that there are no obstructions which would prevent removal of all
side cabinet panels and access to the jets components, especially on
the side with the equipment bay doors.
3.1 Outdoor Location
• The proximity to changing area and shelter (especially in regions
subject to cold weather).
• The pathway to and from your hot tub (this should be free of debris
• The closeness to trees and shrubbery (remember that leaves and
• A sheltered environment (less wind and weather exposure can result
in lowered operation and maintenance costs).
to place the hot tub under an unguttered roof overhang since run-off
water will shorten the life expectancy of the hot tub cover.
3.2 Indoor Location
• PROPER FOUNDATION-
sidering a foundation that will adequately support the spa the entire
-
nies, roofs or other platforms not specifically tied into the main struc-
tural support, you should consult a professional Structural Engineer
with experience in this type of application.
• PROPER DRAINAGE
measures to sufficiently handle excessive water spillage. Be sure
the flooring in which the spa rests on has adequate drainage and can
provisions for ceilings or any other structures that may be below the
spas installation. Areas around your spa can become wet or moist
so all flooring and subsequent furniture, walls and adjacent structures
should be able to withstand or resist water and moisture.