Sundance Spas Maxxus Hot Tub User Manual


  Open as PDF
of 90
 

• PROPER VENTILATION
with an Engineer or authority competent enough to understand the
necessary provisions needed to vent moist or heated air and air asso-
ciated with chemical odors outdoors. When the spa is in use consid-
erable amounts of moisture will escape potentially causing mold and
mildew, over time this can damage certain surfaces and or surround-
ings.
• SUFFICIENT ACCESS
need to access or gain entry to any portion of the spa for servicing, it
is highly recommended that you plan your indoor installation to pro-
vide full access to the entire spa.
• WARRANTY
any improper installation not in accordance with local codes or au-

local state or city building ordinances.
WARNING:
chemistry, proper ventilation is recommended to reduce

present in the air or water. Consult a licensed architect

installing your hot tub indoors.
4.0 General Electrical Safety Instructions
Your new Sundance® hot tub is equipped with the “state-of-the-art”
Sentry
™

self-protective equipment in the industry. Nonetheless, this hot tub must

local Sundance dealer or local building department should you have any
questions regarding your installation.

equipped with a current collector system. A pressure wire connector is
provided on the surface of the control box, located inside the equipment
) to permit connection of a bonding wire between
 previous next