when “Economy” mode is selected (sec. 11.3), the heater activates only
during a programmed lter cycle.
When in a Summer Logic condition is active (see note below), the lter/
circulation pump will turn on for all programmed lter cycles.
tub may exceed the set temperature. This condition may occur
rises two degrees above the set temperature, a “Summer Logic”
optional ozonator (if equipped). This safety feature cannot be
altered!
until the water temperature cools to the set temperature (except
-
run times in warm weather.
CYCLE) button to enter the
This means the system is ready to accept your changes to the start
time for cycle number one. Simultaneously, the large four-digit display in
the center of the screen displays the currently programmed start time for
UP) or (DOWN) button to adjust the start time in incre-
ments of 30 minutes.
CYCLE) button to display and adjust each subsequent
cycles start time. With each press, the currently programmed status
will be shown in the large four digit display. To adjust any displayed
value, simply press the (UP) or (DOWN) button.
SELECT) button to move down the menu from Start
-
UP) or
according to which
filter cycle is being pro-
grammed.
1*