Filter
Top Products
4
Important Safety Information
RCR2584 Rotary Cutter 312-459M 7/14/08
Land Pride
Table of Contents
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new labels
go to your Land Pride Dealer.
3. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by the manufacturer. When ordering new components make
sure the correct safety labels are included in the request. To
order new labels go to your Land Pride dealer.
4. Refer to this section for proper label placement.
To install new labels:
5. To install new labels:
a. Clean the area on which the label is to be placed.
b. Peel backing from label. Press firmly on surface,
being careful not to cause air bubbles under label.
14363
818-187C
Danger PTO Shield
818-130C
Caution 540 RPM
14397