Filter
Top Products
35
Section 6: Specifications& Capacities
2/02/08
RC5014 (540 RPM) and RCM5014 (1000 RPM) Rotary Cutters 330-117M
Land Pride
Table of Contents
RC5014 and RCM5014 Series
RC5014 & RCM5014
Min. PTO Horse Power 70
Gear Box Horsepower 250 HP Splitter
210 HP Center & wing
Gear Box Lubrication Gear Lube 80-90W EP
Cutting Capacity Up To 3" Material
Machine Weight 7,078 lbs. Approx.
(With single row chain guards, 6 laminated tires, dual axle, 540 CV main driveline)
Blade Tip Speed @ 540 RPM Center blade: 17,377 FPM
Wing blade: 17,329 FPM
@1000 RPM Center blade: 18,165 FPM
Wing blade:18,317 FPM
Tongue Weight 2300 lbs.
Hitch Jack Standard hand crank
Hitch Type Pull-Type, Self-Leveling Hitch & Clevis
Wing Offset Right wing model with weight box on left side
Cutting Width
Overall Width
Minimum Transport Width
13’-6”
14’-7”
8’-9”
Overall Length 19’-3”
Deck Height 10 1/2”
Cutting Height 2” to 14” High with hydraulic cylinder and stroke control spacers
Deck Material Thickness 3/16”
Side Skirt Thickness 1/4”
Skid Shoes Wing and Weight Box: Reversible & replaceable
Center Deck: 2 - Replaceable
Blades - 4 (2 per Carrier) 1/2” x 4” Thru-harden free swinging alloy steel with uplift
Blade Overlap 6”
Blade Bolt Keyed with hardened flat washer & lock nut
Blade Holder 3/16” Round bolt-on stump-jumper with 1” diamond shaped blade bar
Deck Ring Optional 1/2” x 3” fully welded
Front & Rear Guards Optional rubber, single chain or double chain
Heavy Duty
Input Driveline Options
Conventional u-joint ASAE Category 5 with 1 3/8”-21 spline
Constant velocity u-joint ASAE Category 5 with 1 3/8”-21 spline or 1 3/4”-20 spline
Heavy Duty
Connecting Drivelines
ASAE Cat. 5 with slip-clutch
Tire Options 6” x 21” Laminated tires
or 27” x 7.75” x 15” Used aircraft tires w/wo foam filling
or 15” Rims
Wheel Options 5 or 6 Wheels
Transport Axle Spring-cushioned on center transport axle
Hubs Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4” shafts
Colors Standard color: Beige
Optional colors: Green or Red
Section 6: Specifications& Capacities