Filter
Top Products
22
Section 4: Options
RC5014 (540 RPM) and RCM5014 (1000 RPM) Rotary Cutters 330-117M 2/02/08
Land Pride
Table of Contents
Safety Guard Options
!
DANGER
Rotary Cutters have the ability to discharge objects at high
speeds; therefore, the use of front and rear safety guards is
strongly recommended when cutting along highways and in
areas where people may be present.
Land Pride offers three types of safety guards to best suit
your application: rubber skirt guards, single row
chainguards and double row chainguards.
• Rubber skirt guards are designed for light duty
applications.
• Single row chainguards are constructed with a single
row of hanging chain links. They can withstand harsher
applications than rubber skirts.
• Double row chainguards are constructed with two
staggered rows of hanging chain links. The second row
provides an additional barrier for stopping thrown
objects.
Part Number & Description
Rubber Guards
318-817A Front Rubber Safety Guards
318-824A Rear Rubber Safety Guards
Single Chain Guards
318-816A Front Single Row Chainguards
318-823A Rear Single Row Chainguards
Double Chain Guards
318-818A Front Double Row Chainguards
318-825A Rear Double Row Chainguards
IMPORTANT: Not all objects will be stopped by the
safety shields. Therefore, Land Pride recommends
using extreme caution when cutting in public areas.
It is best to operate the Rotary Cutter when no one
is within 300 feet of the cutter.
Section 4: Options
Wheel Options
Land Pride offers four wheel options to best suit your
application:
• 6" x 21" Laminated Tires are constructed of laminated
layers of solid rubber that will never go flat.
• 24" x 7.75" x 15" Used Aircraft Tires without foam filling
are built tough to withstand the rugged use a cutter
receives and to provide a smoother ride when
transporting from field to field.
• 24" x 7.75" x 15" Used Aircraft Tires with foam filling
have the same features as the Aircraft Tires without
foam except the foam filled tires won’t go flat.
• 15" Rims can be supplied with your cutter should you
prefer to provide your own tires.
Part Number & Description
814-265C 6" x 21" Laminated Tire
814-286C 27" x 7.75" x 15" Used Aircraft Tire
without foam filling
814-287C 27" x 7.75" x 15" Used Aircraft Tire
with foam filling
814-284C 15" Rim
Driveline Options
Land Pride offers two input driveline options. Connecting
drivelines are not optional. See your nearest Land Pride
dealer should you desire to change one or more
drivelines on your cutter.
Input driveline Options
• Cat. 5 Standard conventional driveline capable or
turning angles up to 35 degrees while operating.
• Cat. 5 Constant velocity driveline capable of turning
angles up to 80 degrees while operating.
Connecting driveline
• Cat 5 driveline with Slip Clutch Protection
Part Number & Description
Input driveline Options (540 RPM)
318-038S CAT. 5 Constant velocity driveline 1 3/8-6
318-039S CAT. 5 Standard driveline 1 3/8-6
Input driveline Options (1000 RPM)
318-042S CAT. 5 Standard driveline 1 3/8-21
318-041S CAT. 5 Constant velocity driveline 1 3/8-21
318-144S CAT. 5 Constant velocity driveline 1 3/4-20
Connecting drivelines (540 & 1000 RPM)
318-422V Cat. 5 Intermediate driveline w/slip clutch 540/1000 RPM
318-420S Cat. 5 Wing driveline w/slip clutch 540/1000 RPM