Filter
Top Products
52
Section 6: Specifications & Capacities
ZT60i & ZT72i (S/N 748110+) Accu-Z
®
Zero Turn Mowers 357-552M
Table of Contents
2/06/14
Overall width (Chute down) 74 1/4" 86 1/2"
Overall Width At Rear Tires
AT Deck
52"
74 1/4"
52"
86 1/2"
Overall Length With ROPS Up
With ROPS Down
88"
91 1/2"
Overall Height With ROPS Up
With ROPS Down
75"
49 3/4"
Roll Over Protective Structure Certified ROPS, includes seat belt
Drive Tires 24 x 12.00 - 12, Turf tread
Front Tires 13x6.5 - 6, Rib tire
Hour Meter Standard equipment
Fuel Capacities Twin 6 US GAL. tanks (Total fuel capacity = 12 US GAL.)
Steering Type Twin lever steering provides independent control of each drive wheel
Twin Lever Steering Controls Speed, forward, reverse, brake, and turns
Steering Turning Radius True zero degree. Turns with counter-rotating independent drive wheels
Hydraulic Brake Service Hydrostatic dynamic braking
Park Brakes Internal wet disk, manual activated
Ground Speed Forward: 0-12 MPH
Reverse: 0-6 MPH
Wheel Drive Single V-belt with spring tension idler pulley
Electrical Operated Logic-Control Safety
Features
Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Evaporative Emission Control System
on EPA Compliant Mowers
This equipment uses a sealed fuel system which incorporates a non-vented fuel
cap. Evaporative emissions are vented to the engine where they are combusted
during normal engine operation.
Seat Options Deluxe cushion seat with arm rests
Optional Suspension seat with arm rest
Mainframe Construction Welded steel
Drive Motor Mount Fabricated from 3/16" steel plate
Front Caster Wheels Free turning with sealed for life roller bearings
Front Caster Forks 3/8” steel
Deck Thickness 3/16" deck with 3/16" reinforcement plate connecting spindle housing mounts
Box-Section Reinforced Front Edge 3/16" with solid 1" x 1/4" steel bar for reinforcement.
Deck Trim Edges Solid 1” x 1/4” steel bar for reinforced trim edge.
Deck Housing Depth 5 3/16” deep, (room for high-capacity mowing)
Deck Lift Foot-operated deck height adjustment with transport position
Pin for setting height
Hand Operated Controls Ignition switch, throttle lever, control levers, park brake lever,
blade engagement switch, choke knob and Fuel Tank Selector Valve
Indicators Engine warning light and hour meter
Cup Holder Two cup holders molded into the left side fuel tank
They accommodate nearly any cup size
Cutting Heights Height adjustment in 1/4" increments from 1” to 5”
Mowing Blades Heavy-duty, heat-treated, high-lift Fusion
®
edge
.25" x 2 1/2" x 21" .25 x 2 1/2” x 25”
Blade Tip Speed 18,350 FPM 18,800 FPM
Blade Drive Electric clutch drive with single V-belt to three spindles and spring tension idler
pulley
General Specifications & Capacities
Mower Models ZT60i ZT72i