Filter
Top Products
34
Section 5: Maintenance & Lubrication
ZT60i & ZT72i (S/N 748110+) Accu-Z
®
Zero Turn Mowers 357-552M
Table of Contents
2/06/14
NOTES:
1. Initial engine oil and oil filter change is after the first 5 hours of operation. Thereafter, change engine oil and oil filter
every 50 hours of operation. Change every 25 hours when operating the engine under dusty or dirty conditions,
heavy load, high temperatures, and hot weather periods. Refer to Engine Owner’s Manual.
2. Torque lug nuts initially and after first 2 hours of operation.
3. Remove cooling shrouds and clean cooling areas. Check oil cooler fins and clean as needed. Refer to Engine
Owner’s Manual.
4. Inspect ground and deck belt tensions every 6 months or 100 hours and replace if worn or cracking is noticed.
Otherwise, replace every 200 hours or 2 years whichever comes first.
5. Inspect transaxles for oil leaks. Have your nearest Land Pride Service center make repairs as needed.
6. Replace air cleaner filter element if damaged, every 200 hours or every season (whichever comes first). Replace
more frequently when used in dusty conditions.
7. Initial Transaxle oil and filter change is between 25 and 50 hours of operation.
8. X/M = Service per hours indicated in column or monthly (whichever comes first).
X/A = Service per hours indicated in column or annually (whichever comes first).
Maintenance Schedule
Service at Intervals Indicated
Every
25 Hrs
Every
50 Hrs
Every
100 Hrs
Every
200 Hrs
Every
500 Hrs
Refer to
Page
Clean Mower, Deck & Engine Cooling System Daily (After engine has cooled.)
Verify Safety Start Interlock System Daily (Before each use) 19
Inspect Unit For Loose Hardware & Damage Daily (Before each use) 33
Visually Inspect Tires Daily (Before each use) 59
Check Engine Oil Level Daily (Before each use & every 4 hours thereafter) 43
Clean Engine Air Intake Screen Daily (Before each use & every 4 hours thereafter) 43
Check Fuel Level Daily (Before each use) 41
Inspect Fuel System For Leaks Daily (Before each use) 41
Check Blades - Sharp & Securely Fastened Daily (Before each use) 46 & 58
Check Discharge Chute -
Make Sure It Is Properly Secured In Place
Daily (Before each use)
Grease Blade Spindle Bearings X 49
Change Engine Oil & Filter (1) X 43
Clean Cylinder & Head Fins X
Check Battery Connections X 13 & 35
Check Tire Pressure X 59
Clean Engine Exterior (3) X
Check Transaxle Oil Level X 39
Tighten Lug Nuts On Wheels (2) X 58
Grease Front Suspension Pivot X 50
Grease Caster Wheel Bearings X 50
Check Ground & Deck Belt Tension (4) X 37
Check Transaxle For Oil Leaks (5) X 41
Change Fuel Filter (3) X 42
Grease Deck Lift Points & Struts (8) X/M 50
Replace Spark Plugs (3) X
Replace Air Cleaner Paper Element (6) X 44
Inspect Tethered Fuel Caps (8) X/A 42
Change Transaxle Oil & Filter (7) (8) X/A 40
Check & Adjust Parking Brakes (8) X/A 24