Filter
Top Products
Front panel
Square ONE Splitter 11
Phones, power and media split section
1 LEVEL control knob (dB): Adjustment of the
headphones signal in the range
4 (off) to +10dB.
2 Headphone jack: Standard TRS-type 1/4” jack for
connecting headphones, enabling you to monitor the solo
function.
3 Blue POWER LED: Mains power on/off indicator. When
LED is illuminated, mains power is on. (There is no mains on/off
switch on the Square ONE Splitter.)
4 Yellow MEDIA SPLIT LED: Illuminates to indicate that
media split is in operation. This has a duplicate LED on the rear
panel; see item 5 in “Media split and ground lift switches” on
page 13.
Note: Headphone output includes +10dB of fixed gain.
2
1
3
4
DOC02-SQ1SPLITTER_Square ONE Splitter_Op_IssC.pdf 23 27/04/2010 17:00:43