Filter
Top Products
Front panel
Square ONE Splitter 9
Front panel
The front panel of the Square ONE Splitter is divided into three main sections, as follows:
1 FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT: Eight-channel section containing the
paralleled inputs and transformer isolated balanced outputs; see “FIXED GAIN ISOLATED OUTPUT C /
PARALLEL INPUT section” on page 9.
2 ACTIVE SPLITTER: Eight-channel section containing the channel controls; see “ACTIVE SPLITTER
section” on page 10.
3 Phones, power and media split: see “Phones, power and media split section” on page 11.
4 Four cut-outs for rack mounting.
FIXED GAIN ISOLATED OUTPUT C / PARALLEL INPUT section
The functions of channels 1 to 8 in this section are
similar, although the input of channel 8 is also used
for the media split function.
1 TX OUT 1 to TX OUT 8 sockets: Eight
transformer isolated balanced outputs, each with a
male XLR chassis connector.
2 IN 1 to IN 8 sockets: Eight electronically
balanced inputs, each with a female XLR chassis
connector. Socket IN 8 is one of the two channel 8
media split inputs, the other being on the rear panel.
3 Channel number and write-on panel.
231
4
3
1
2
DOC02-SQ1SPLITTER_Square ONE Splitter_Op_IssC.pdf 21 27/04/2010 17:00:43