Filter
Top Products
Introduction
Square ONE Splitter 5
Using the parallel inputs
Typically, the mic signals - from different stage locations - are fed to the splitting systems using
multi-channel stage boxes and cables. This infrastructure is normally subjected to tremendous stresses
during the show and during set up/breakdown, and it is not unusual to develop intermittent faults on some
individual signal lines. If this occurs there is normally little time available to de-bug the problem fully before
the show. However, the Square ONE Splitter provides a solution for such circumstances by providing an
additional parallel input on the front panel of the unit for emergency connection of a spare mic or individual
replacement cable. These inputs can also be used for single mic locations, eliminating the requirement to
utilise an 8-way stage box and multi-core cable for just one mic.
DOC02-SQ1SPLITTER_Square ONE Splitter_Op_IssC.pdf 17 27/04/2010 17:00:42