Filter
Top Products
Introduction
2 Square ONE Splitter
All audio connections are on balanced XLRs (wired pin 2 hot) featuring gold plated connectors. The mic
inputs and transformer balanced outputs are mounted on the front panel for easy access, and the two
electronically balanced outputs are on the rear panel along with the duplicate set of inputs.
An integral switch mode power supply automatically adapts to mains voltages in the range 100 to 240 volts
(50 to 60Hz). An LED on the front panel indicates when power is applied to the unit; there is no mains power
on/off switch.
Figure 1: Typical channel I/O connection options
Analogue or digital
multi-track recorder
Parallel inputs
Transformer balanced output
Electronically
balanced output
Front panel Rear panel
FOH console
(for example, the
Midas Verona)
Outside
Broadcast
Broadcast
Mobile
Recording
Studio
Recording
GuitarMic
Keyboard
MON console
(for example, the
Midas Siena)
Electronically
balanced output
Or
DOC02-SQ1SPLITTER_Square ONE Splitter_Op_IssC.pdf 14 27/04/2010 17:00:42