Filter
Top Products
64
J-300
17.5 Wireless Remote Battery Replacement Procedure
1. Turn the remote unit over and locate the battery door
(Figure A).
2. Rotate the battery door, with a coin, counterclockwise to
the Open position (Figure B). When the door is unlocked it
will pop up slightly.
3. Remove battery door by lifting the door upward (Figure C).
4. Replace battery using CR2430 or equivalent (Figure D).
5. Reinstall the battery cover, using the coin rotate the door
to the Close position (Figure E).
Note: Remote unit is water resistant not waterproof. Although it is
designed for use while in the spa, it should never be left in the spa while
the cover is on and spa is not in use. The remote should be stored in a
dry location such as the stereo remote pouch (if applicable) located on
the outside of the spa cover or within your home. Extreme weather can
affect the remote control battery. In extreme hot or cold environments
store the remote control indoors to prolong battery life.
17.6 BLUEWAVE™ Spa Stereo System Specications
Power supply ...................................10.7-14.4V DC
Tuner
FM radio sensitivity....................................... 8uV
FM radio reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo
OPEN
CLOSED
C
R24
30
3
V
Fig. A
Battery
Door
OPEN
CLOSED
C
R
24
30
3
V
Fig. B
OPEN
CLOSED
C
R
24
30
3
V
CR2430
3V
OPEN
CLOSED
Fig. C
Fig. D
OPEN
CLOSED
C
R
2
4
30
3
V
Fig. E