Filter
Top Products
41
J-300
8. Remember to keep spa covered when not in use. Maintaining proper
water levels assures efcient operation and efcient electrical usage.
9. Do not expose your spa to the sun for extended periods of time as
UV rays can damage the interior surface.
10. Use caution when removing cover. Before removing cover, assure all
locks have been released to avoid lock breakage and or cover strap
damage.
12.6 Tool Free Access Door
The Tool Free Access door provides fast
access to the equipment bay and
components without the need of tools. To
remove the door, follow the steps below.
Note: To avoid any injuries, more than
one individual must perform these steps.
1. Locate the door's retractable push button
on the top of the front panel, Figure A.
2. Press the retractable push button to
release the panel door from the spa frame,
Figure B.
3. Slowly and gently tilt the panel
forward to remove, Figure C. This will
expose the equipment bay for easy
access to the components. Place the
panel in a safe location to prevent
from damaging it.
4. To reinstall the panel just follow the
steps above in reverse order.
12.7 Maintaining The Synthetic Cabinet
Your new spa’s synthetic cabinet requires little or no maintenance of
any kind. To clean, simply wipe cabinet with a clean towel and mild soap
solution.
CAUTION: Never spray cabinet with a garden hose for any
reason since this action may induce an electrical short in the
spa’s electrical equipment.
Figure C
Figure A
Figure B