Filter
Top Products
26
J-300
10.2 Activate Jet Pumps
The JETS 1 button activates jets pump 1. The rst press
turns jets pump 1 on; the second press turns jets pump 1
off. The JETS 2 button activates jets pump 2 (if equipped).
turns jets pump 2 on; the second press turns jets pump 2 off. When
manually activated, either pump will automatically turn off after 20
minutes.
10.3 Light On/Off Button
Pressing this button activates the waterfall light, footwell light,
lighted cup holders, and backlit pillows lights in unison as
follows: high - medium - low - off.
Note: Lights automatically turn off after 2 hours.
10.4 Light Mode Button
This button offers 4 light modes for your enjoyment. Press this
button to select your favorite lighting effect as follows:
Press
Once
Press
Again
Press
Again
Press
Again
Solid Color Mode:
Selects one of 7 solid (high-intensity) colors of choice.
AMBER (X7) GREEN (X8) AQUA (X9) NEAR
WHITE (X10)
BLUE (X4) VIOLET (X5) RED (X6)
Freeze Color Blend Mode:
Selects or “freezes” your low speed blending color of choice.
Low-Speed Color Blend Mode
High-Speed Color Blend Mode
10.5 Jets
The water ow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Some jets
offer an adjustable center nozzle that allows you to change the
water discharge angle. Simply tilt the center nozzle in these jets
to the desired angle to customize your personal massage.
Other jets offer a spiral action that produces a surging stream of
air and water that provides a vigorous massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper ltration characteristics within the spa.