Filter
Top Products
55
9 Set the installed hard disks using BIOS Setup.
After installing IDE-compliant internal options, set the types using [Main]-[IDE Drive 3] and
[IDE Drive 4] of BIOS Setup (set to [Auto] by default).
Point
• To remove options, reverse the installation procedure.
• After installing a hard disk or magneto-optical disk drive, take the following steps to configure
the disk.
• For Windows NT model
- After installing a hard disk, configure partitions and format the disk by using “Disk
Administrator”. “Disk Administrator” is activated by clicking the [Start] button, [Program],
then [Administrative Tools].
- After installing a magneto-optical disk, configure partitions and format the disk by using
“MO Formatter”. “MO Formatter” is activated by clicking the [Start] button, [Program],
then [MOWare].
• For Windows 2000 model
- When you have installed a hard disk, configure partitions and format the disk by using
“Disk Management”. “Disk Management” is under Storage branch displayed by clicking
the [Start] button, [Program], then [Computer Management].
- After installing a magneto-optical disk, format the disk using “MO Disk Formatter”.
- “MO Disk Formatter” is activated by clicking the [Start] button, [Program], then [MO
Utilities].
• Keep the removed brackets in a safe place.
08-DP8 (51-56) 3/2/01, 2:32 PM55