Filter
Top Products
54
• When connecting a SCSI-compliant internal option
Connect the connector on the one side of a SCSI card flat cable to the connector of an
internal SCSI option. Connect the connector on the other side to the connector of the
SCSI card installed on the expansion slot.
7 Connect the power cable.
Connect an unused power cable to the connector on the installed internal option.
Point
• When installing an internal magneto-optical disk drive, connect a power cable that has only
one power connector. If that power cable is not available, use other power cable that should
be used to connect an internal magneto-optical disk drive only.
8 Reinstall the front panel and upper and side covers.
08-DP8 (51-56) 3/2/01, 2:32 PM54