Filter
Top Products
48
2 If brackets are attached to both sides of the internal hard disk to be replaced (installed),
remove the brackets.
Remove the four screws to remove the brackets.
3 Disconnect the power plug from the outlet.
4 Remove the side cover.
5 Remove the mounting bracket from the PC unit.
Remove the two screws to remove the brackets.
6 Replace (or install) the internal hard disk.
Remove the four screws from the sides of the removed mounting brackets and install the
internal hard disk to be replaced (or installed) onto the brackets.
7 Attach the brackets to the PC unit.
Secure the bracket with the two screws removed in Step 5.
07-DP8 (43-50) 3/2/01, 2:32 PM48