Filter
Top Products
24
■ Inserting or Removing CD
● Inserting a CD
1 Press the eject button.
This ejects the tray to mount a CD.
2 With the label side of the CD facing upward, put the CD in the center of the tray.
3 Press the eject button.
The tray enters the unit to load the CD.
Point
• The BUSY lamp lights up when the CD is loaded. Proceed to the following operation after making
sure that the BUSY lamp turns off.
● Removing the CD
Confirm that the Busy lamp is off, then press the Eject button to remove the CD.
Eject button
04-DP8 (18-26) 3/2/01, 2:31 PM24