Maintenance
Maintenance Service
Interval
Maintenance Procedure
Before storage
• Charge the battery and disconnect the battery cables.
• Perform all maintenance procedures listed above before storage.
• Paint any chipped surfaces.
Monthly
• Check the battery charge.
Yearly
• Inspect the emissions lter.
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
Premaintenance
Procedures
Raising the Seat
Make sure the motion control levers are locked in the
park position. Lift the seat forward.
The following components can be accessed by raising
the seat:
• Serial plate
• Service decal
• Seat adjustment bolts
• Fuel lter
• Battery and battery cables
Periodic Maintenance
Lubrication
Greasing the Bearings
Service Interval: Every 25 hours/Monthly
(whichever comes rst)
Grease Type: NGLI grade #2 multi-purpose gun
grease.
Grease the front caster wheels (Figure 21).
1
G007184
Figure 21
1. Front caster tire
1. Park the machine on a level surface and disengage
the blade control switch.
2. Move the motion control levers outward to
engage parking brake, stop the engine, remove the
key, and wait for all moving parts to stop before
leaving the operating position.
3. Clean the grease ttings shown in
Figure 22 with
a rag. Make sure to scrape any paint off of the
front of the tting(s).
31