Filter
Top Products
Aquatic Fitness System
2005 Owner’s Manual
42
AquaFit™Dual Temp (Spa-Side)
Symptom Problem Corrective Action
“OH” on LED Digital Display
Window
High Temperature Condition:
Do not enter spa water. The water
temperature is above acceptable limits.
The water temperature has reached
110°F (≅43.3°C.). The system will shut
down.
1. Remove the cover and
allow the water to cool.
2. Reset the power to the spa
by resetting the GFCI
breaker.
No further action is required
unless the water temperature
fails to return to acceptable
levels – in which case, call your
dealer for service.
3 Flashing Lights
AND
“OH” on LED Digital Display
Window
High Limit Condition:
Do not enter spa water. The water
temperature is above acceptable limits.
The water temperature has reached
118°F (≅47.8°C.). The system will shut
down.
Call your dealer for service.
3 Flashing Lights
System Error:
1. Check the water level
2. Clean the filters.
3. If the problem persists, reset
the power to the spa by
resetting the GFCI breaker.
If the error is not resolved after
resetting the spa, call your dealer
for service.
Temperature Probe Failure:
If the LED Digital Display shows
32°F (≅0.0°C) or 136°F (≅57.8°C),
you have an open temperature
sensor. The heater is
deactivated.
Call the dealer for service.