Filter
Top Products
Aquatic Fitness System
2005 Owner’s Manual
22
LED Digital Display Window
LED Digital Display Window: This window displays the actual
water temperature in either °F or °C. It will also display time, filter
cycle start time, filter cycle duration time, and the number of filter
cycles.
When you are setting the “target temperature” for your water,
this window will display the target temperature. After a brief
pause, about 5 seconds, the window will return the display to
the actual water temperature.
Jets Button
Jets Button: Press the button once to turn on the pump
to Low Speed. A second press will turn it to High Speed.
A third press will typically turn the pump off, unless the
pump has been automatically activated during a heating
cycle – in which case a third press will return the pump to
the Low Speed. The Jets Indicator Light, next to the Jets
Button, will be lit while the pump is running. A Jet Pump
Icon will also display in the upper left corner of the LED
Digital Display Window whenever the pump is running.
A built-in timer will automatically shut the pump off after
30 minutes of operation unless you turn it off manually.
When the pump is first turned on, a small scale will be
displayed in the lower left corner of the LED Digital Display
Window.
This Jet Button controls water flow only for the spa side of
the AquaFit™ Dual Temp.
When the Jets Indicator Light, the Light Indicator Light,
and the Heat Indicator Light are flashing, they indicate a
problem with your spa. See the
Troubleshooting Section
for more details.
Pushing the JETS Button will disable any concurrent filter cycle.