Filter
Top Products
Aquatic Fitness System
2005 Owner’s Manual
24
Up and Down Buttons
Up (+) and Down (-) Buttons: Pushing the UP (+) Button
increases the temperature and pushing the DOWN (-) Button
decreases the temperature. Push the respective button one
time for each degree of temperature change you want, or “push
and hold” the button for rapid adjustment.
The actual spa water temperature is normally displayed in the
LED Digital Display Window until you push the UP (+) or DOWN (-
) Button or the Program Button. If you push the UP (+) Button or
the DOWN (-) Button the LED Digital Display Window will change
to indicate your target temperature setting. The LED Digital
Display Window will also display the SET TEMPERATURE Icon in
the lower right side of the Window to indicate the temperature
shown in the window is a target setting and not the actual
temperature. The Temperature Icon will also be displayed along
the top of the window if your new setting requires more heat.
Once the new temperature is set, the actual spa water
temperature will again be indicated. The spa will heat to the new
temperature automatically.
Program Button
Program Button: The PROGRAM Button is used to set several
different functions including:
Programmable Item Program Button Action
Clock Press & Hold 5 seconds
Filter Cycle Start Time 2
nd
Press
Filter Cycle Duration 3
rd
Press
Number of Filter Cycles 4
th
Press
Temperature Unit 5
th
Press
Quit Program sequence 6
th
Press or wait 60 seconds
When you have successfully entered the programming
sequence, the word “PROGRAM” will be displayed in the LED
Digital Display Window.
You can now start to program your spa controls.