Filter
Top Products
Aquatic Fitness System
2005 Owner’s Manual
18
Economy Mode
In this mode, the timer determines when the filtering and heating take place.
If the LED Digital Display Window displays COL and ICE, Cool or Ice conditions have
been discovered. These conditions take precedence over the Economy Mode. Heat
will be applied as required by the identified condition regardless of the filter cycle. See
the
Troubleshooting Guide for more information.
Set the display to F4 to receive two (2) hours of filtration and heat twice a day.
To select filter cycle F4, press and hold the Warmer and Cooler Buttons for
three (3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down)
Button until you see F4 displayed in the window.
You have now successfully selected to receive two (2) hours of filtration twice
a day and heat your water only during filter cycles. The programming mode
will automatically store your choice and exit if you don’t make another change
within three (3) more seconds.
Set the display to F5 to receive two (2) hours of filtration and heat three times
a day. To select filter cycle F5, press and hold the Warmer and Cooler Buttons
for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler
(Down) Button until you see F5 displayed in the window.
You have now successfully selected to receive two (2) hours of filtration three
times a day and heat your water only during filter cycles. The programming
mode will automatically store your choice and exit if you don’t make another
change within three (3) more seconds.
Set the display to F6 to receive two (2) hours of filtration and heat four times a
day. To select filter cycle F6, press and hold the Warmer and Cooler Buttons
for three (3) seconds. Then press the Warmer (Up) Button, or the Cooler
(Down) Button until you see F6 displayed in the window.
You have now successfully selected to receive two (2) hours of filtration four
times a day and heat your water only during filter cycles. The programming
mode will automatically store your choice and exit if you don’t make another
change within three (3) more seconds.