Dimension One Spas 01513-192 Hot Tub User Manual


 
Aquatic Fitness System
2005 Owner’s Manual
17
Filter Cycles
Standard Mode
Standard Mode heating is automatically controlled by the loss of water temperature. If the spa
water drops 2°F (1.1°C) below the set temperature, the low speed pump and the heater will
automatically turn on. They will both remain on until the water temperature reaches the
temperature set point.
In this mode, the filter cycle operates independently of the need for heat to ensure
proper filtration.
Set the display to F1 to receive two (2) hours of filtration twice a day. To select
filter cycle F1, press and hold the Warmer and Cooler Buttons for three (3)
seconds. Then press the Warmer (Up) Button, or the Cooler (Down) Button
until you see F1 displayed in the window.
You have now successfully selected to receive two (2) hours of filtration twice
a day and maintain your water temperature separately. The programming
mode will automatically store your choice and exit if you don’t make another
change within three (3) more seconds.
Set the display to F2 to receive two (2) hours of filtration three times a day. To
select filter cycle F2, press and hold the Warmer and Cooler Buttons for three
(3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down)
Button until you see F2 displayed in the window.
You have now successfully selected to receive two (2) hours of filtration three
times a day and maintain your water temperature separately. The
programming mode will automatically store your choice and exit if you don’t
make another change within three (3) more seconds.
Set the display to F3 to receive two (2) hours of filtration four times a day. To
select filter cycle F3, press and hold the Warmer and Cooler Buttons for three
(3) seconds. Then press the Warmer (Up) Button, or the Cooler (Down)
Button until you see F3 displayed in the window.
You have now successfully selected to receive two (2) hours of filtration four
times a day and maintain your water temperature separately. The
programming mode will automatically store your choice and exit if you don’t
make another change within three (3) more seconds.