Filter
Top Products
10
Fig. 19
Fig. 20
Fig. 21
Fig. 23Fig. 22
5. Fig. 19, illustrates fence body (C) fastened to the
table with the two fence locking handles (F).
6. Loosen locking lever (D) Fig. 20, and slide rear of
fence half (G) onto locking bar (E). Assemble remaining
fence half in the same manner. Then tighten locking
lever (D) to secure each fence half to the fence body.
7. Assemble guard mounting bracket (H) Fig. 21, to top
cover (J) using the four inch-long hex head cap screws,
hex nuts, and eight lock washers (K) as shown in Fig. 22.
8. Assemble top cover (J) Fig. 22, to top of fence body
(C) using the two locking knobs and washers (L).
9. Fig. 23, illustrates top cover properly assembled to
the fence body.
F
C
F
E
G
D
K
K
H
J
C
J
L