Filter
Top Products
LUBRICATION/FILTERS/FRUIDS
90
FUEL SYSTEM
Service Specifications
Fuel Filter Cup Service Interval Every 10 Hours
Fuel Filter Element Change Replace when loss of
power or misfiring occurs
This type filter cannot be cleaned. Change the filter when the engine is
misfiring or a loss of power is evident. It is necessary to remove the air
from the system after each replacement.
Only a filter recommended by your Dealer should be used, to be sure
that it is both effective and capable of withstanding the required suction or
pressure without damage to the filter element.
Fill the fuel tank at the end of each day to reduce condensation.
NOTE: Do not fill the fuel tank to its full capacity. Space is required for
vapor expansion in the event of a temperature change. A tank filled to
capacity may overflow if exposed to a rise in temperature or direct sunlight.
Water Removal from the Filter Cup
Before starting each day's work,
check for water or sediment in the
filter cup. If water or sediment is in
the cup, close the fuel shut-off valve,
remove filter cup, clean and reinstall.
NOTE: Be careful not to allow dirt,
water and other foreign materials to
get into the filter when cleaning the cup.
FILTER CUP