Filter
Top Products
FIELD OPERATION
62
Hitch Lowering Speed Adjustment
To adjust the hitch lowering speed, use the following procedure:
1. Move the hitch control lever forward
to lower the implements.
2. Turn the hydraulic flow control knob
to adjust the lowering speed. Turn
the knob counter clockwise to
increase the lowering speed. Turn
the knob clockwise to decrease
the speed or lock the hitch.
3. After adjusting the speed, raise
the hitch and then lower it to check
the speed.
NOTE: When transporting the tractor on the road with the implement
mounted on the three point hitch, always set flow control knob to the
LOCK position.
IMPORTANT: Never park a tractor with an implement in the raised position.
Moving the control lever forward will lower the implement even though the
engine is not running. If it is necessary to service the implement in the
raised position, use jack stands to safely block the implement in place.
Put the hydraulic flow control knob in the LOCK position.
Lower or block elevated implements and other attachments before
servicing or when leaving the equipment.
HYDRAULIC FLOW
CONTROL KNOB
SLOW
LOCK
SLOW
LOCK
FAST
FAST
FAST