Filter
Top Products
INSTRUMENTS/CONTROLS
22
OPERATING CONTROLS
Control Switches
1. STARTER KEY SWITCH
The starter key switch can be removed with
the switch in the OFF position. Four position
switch as follows:
position
(OFF)
Engine and all lamps except
the turn signal and flasher lamps
are turned off.
Position
(HEAT)
&
(ON)
First position clockwise from
OFF. In this position (Engine not
running) energizes the glow plugs.
The charge indicator, glow plug
indicator and oil pressure indicator
will illuminate.
The fuel gauge and temperature gauge will show correct values.
position
(START)
Turn the key fully clockwise against the force of the
spring in the switch. The starter motor will turn the engine.
Release the key immediately when engine starts.
NOTE: To prevent operation by persons not authorized and the possible
discharge of the battery, remove the starter key when you leave the tractor.
IMPORTANT: Do not keep the starter key switch in the ON position for
a long period of time when the engine is not operating.
4
3
5
2
1