Filter
Top Products
INSTRUMENTS/CONTROLS
26
2. SPEED RATIO CONTROL PEDAL (HYDROSTATIC DRIVE ONLY)
The control pedal is spring loaded to
the center or neutral position. Push down
on the front of the pedal to increase
forward speed. Push down on the rear
of the pedal to increase reverse speed.
3. BRAKE PEDALS The pedals when locked together,
provides braking to both rear wheels
for stopping the tractor. When the brake
pedals are unlocked, the pedals are
used for individual braking of the rear
wheels to aid in turning the tractor
in soft soil conditions.
Push the RH brake pedal down to slow
or stop the RH rear tractor wheel, push
the LH brake pedal down to slow or slow
or step the LH rear wheel. The tractor
will turn in the direction of the wheel
that is slowed or stopped.
4. BRAKE PEDAL LOCK The brake pedal lock is located at
the brake pedal arms and is used to
lock the two brake pedals together so
that both brakes are applied.
CAUTION: Brake pedals must be locked together for road travel.
This will insure uniform brake application and maximum stopping
ability.
WARNING: Extra weight and bad traction conditions such as mud
or ice increase your stopping distance. Remember that liquid in the
tires, weight on the machine or wheels, tank filled with fertilizer,
herbicides or insecticides - all these add weight and increase
the distance you need in which to stop.
LOCKLOCK
REMOVEREMOVE
BRAKE PEDAL
BRAKE PEDAL
(LEFT SIDE)
(LEFT SIDE)
BRAKE PEDAL
(LEFT SIDE)
BRAKE PEDAL
BRAKE PEDAL
(RIGHT SIDE)
(RIGHT SIDE)
BRAKE PEDAL
(RIGHT SIDE)
2
3
4