Filter
Top Products
SPECIFICATIONS
DIESEL ENGINE
General
Type
14
Three Cylinders, Four Stroke Cycle,
Valve in Cylinder Head, Cross
Flow Porting
Firing Order
Bore
Stroke
Piston Displacement
Compression Radio
Governor Engine Speed without Load
Rated Engine Speed
Engine Idle Speed
Maximum Horsepower (Per SAE J816b & J245)
Valve Clearance (Intake and Exhaust Cold Engine)
IMPORTANT: Valve clearance adjustment must be made when the
engine is not running and is cold.
Engine Lubrication System
Oil Pressure
Fuel Injection Pump
Injection Pump Timing
Fuel Injectors
1-3-2
84mm (3.307 inch)
90mm (3.543 inch)
1496cm (91.29 Cubic inch)
18.0 to 1
2670 to 2730 RPM
2500 RPM
1005 to 1055 RPM
30 HP at 2500 RPM
32 HP at 2500 RPM
0.25 mm (0.010 inch)
BOSCH M Plunger In Line
NIPPONDENSO ND – PFR
11Degrees Before Top Dead Center (BTDC)
Hole Type, NIPPONDENSO, ND – DLLA150P
Fuel System
3
296 to 441kPa (43 to 64 PSI) at 2500
Engine RPM with 20 W Oil at
93.3 C (200 F)
7530
7532