Filter
Top Products
LUBRICATION/FILTERS/FRUIDS
84
ENGINE LUBRICATION
Service Specifications
Oil Level Check Interval Daily
Oil Change Interval Every 100 hours (See NOTE)
Oil Type See Lubrication Table in this manual.
Oil Capacity Without Filter Change 4.5 Liters (4.7 QTS)
With Filter Change 5.0 Liters (5.3 QTS)
NOTE: Change the engine oil after the first 50 hours of operation and
then use the regular change interval. Change the engine oil more frequently
when the operating conditions are severe, such as, operating in very high
or very low ambient temperatures.
Engine Oil Level
To check the engine oil level, put the
tractor on level ground and stop the
engine. Pull the dipstick out, wipe the
dipstick with a dry cloth and install
the dipstick to check the oil level.
If the oil level is below the A (Add)
mark, add oil to raise the oil level to
the F (Full) mark.
Do not raise the oil level above the
F (Full) mark.
IMPORTANT: The level should be checked before starting or 5 minutes
after the engine has been shut off.
NOTE: Above illustrations are in case of 7530/7532.
ENGINE OIL DIPSTICK
ENGINE OIL DIPSTICK
FULL MARK
FULL MARK
FULL MARK
ADD MARKADD MARK
ADD MARK
ADD MARK