Filter
Top Products
38 39
38 39
CHANGING THE BELT (FIG. MM)
● Unplug your saw.
1. Loosen the three bolts (1) and
remove the belt cover (2).
2. Loosen the set screw (3) with
a 4 mm hex key and six hex
screw (4) with a 5 mm hex key
counterclockwise to move the motor
forward.
3. Remove and replace the belt.
4. Lift the motor housing up and
retighten the set screw (3).
5. Retighten the hex screws (4)
clockwise. Do not overtighten.
6. Replace the belt cover and tighten
all bolts.
Fig. MM
1
4
3
2
4