Filter
Top Products
32 33
32 33
Your tool is equipped with the Laser
Trac
®
cutting guide using a Class IIIa
laser beam. The laser beam allows you
to preview the saw blade path on the
stock to be cut before starting the miter
saw. This laser guide is powered by the
transformed alternating current supply
directly through the power lead. The
saw must be connected to the power
source and the laser on/off switch
must be turned on for the laser line
to show.
NOTE:
●
All the adjustments for the
operation of the laser guide has
been completed at the factory.
●
Laser beam is calibrated and
set up to project to the left of the
blade. (Fig. Z-1)
●
If you have any problem or
question on the laser guide, please
contact the Customer Help Line at
800-843-1682.
Fig. Z-1
● AVOID DIRECT EYE CONTACT
Laser radiated when laser guide is
turned on. Avoid direct eye
contact.
●
Laser Warning Label:
Maximum output < 5 mW,
Wavelength: 630-660 nm,
Complies with 21CFR 1040.10 and
1040. 11 Class IIIa Laser Product.
(Fig. Z-2)
●
Laser Aperture Label:
AVOID EXPOSURE: Laser
radiation is emitted from this
aperture. (Fig. Z-2)
Fig. Z-2
top view
laser beam
cutting line
blade
cutting line
laser beam
workpiece
WARNING
!
Laser Warning Label
Laser Aperture Label
LASER RADIATION-AVOID
DIRECT EYE EXPOSURE
Complies with 21 CFR 1040.10 and 1040.11
Max.Output <5 mW Wa
velength: 630-660 nm