Filter
Top Products
T190 Compact Track Loader
Operation & Maintenance Manual 124
LOADER SPECIFICATIONS (CONT’D)
Fluid Capacities
Fluid Specifications
Controls
Cooling system capacity with
heater 11,3 l
Cooling system capacity without
heater 10,2 l
Engine oil with filter capacity 8,7 l
Fuel tank capacity 106 l
Hydraulic reservoir capacity 72,4 l
Hydraulic / Hydrostatic system
capacity 34,1 l
Engine coolant Polypropylene glycol / water mix (53% - 47%) with freeze protection to -37°C
Engine oil Oil must meet API Service Classification of CD, CE, CF4, CG4, or better.
Recommended SAE viscosity number for anticipated temperature range.
* Can by used only when available with appropriate diesel rating.
For synthetic oil use the recommendation from the oil manufacturer.
Hydraulic fluid Bobcat Fluid (P/N 6563328).
Engine Hand lever throttle
Starting Key-type starter switch and shutdown or optional keyless start. Glow plugs
automatically activated by Standard or Deluxe instrument panel.
Front auxiliary (standard) Electrical switch on right-hand steering lever
Rear auxiliary (optional) Electrical switch on left-hand steering lever
Loader hydraulics tilt and lift Separate foot pedals or optional Advanced Control System (ACS) or Selectable
Joystick Control (SJC)
Service brake Two independent hydrostatic systems controlled by two hand-operated steering levers
Secondary brake One of the hydrostatic transmissions
Parking brake Mechanical disc, hand operated rocker-switch on dash panel
Vehicle steering Direction and speed controlled by two hand levers or optional joysticks
Auxiliary pressure release Pressure is relieved through the coupler block. Push in and hold for 5 s.