Filter
Top Products
Appendix C
Series AE11
Series AE11 C-1MN2415
Information in this Appendix applies to the AE11 Generator.
Operator Panel Configuration
Figure C-1 AE11 Operator Panel
Stop Manual
Run
Auto
Start
Hour Meter
(fuel solenoid energized
Low Oil Pressure Shutdown
High Coolant Temperature Shutdown
Over Speed Shutdown
Alternator Charge Failure Warning
Failure to Start Shutdown
Aux2 Input Warn/Shutdown
Aux1 Input Warn/Shutdown
Under Speed Shutdown
Shutdown Warning Indicators
Low Oil Pressure, High Coolant Temperature, Over Speed (Engine), Under Speed (Engine),
Failure to Start Engine.
Warning (or Shutdown) Indicators
Alternator Failure (to Charge Battery), Auxiliary 1 Input Active, Auxiliary 2 Input Active.
Hour Meter Displays total hours of operation based on power applied to Fuel Solenoid).
Stop Stops the Engine and generator set.
Manual Run Immediately energizes the crank cycle to start the generator set and produce power.
Auto Start The engine can only be started by making a connection across the remote start terminals of the
control box. This allows normal automatic backup operation of the Generator Set under control of
the Transfer Switch whenever utility AC power is lost.