Filter
Top Products
24
Chapter 1: Getting Started
For More Information...
For More Information...
On making
measurements on the
demo counter board:
• “Example: Timing measurement on counter board” on page 26
• “Example: State measurement on counter board” on page 28
• Making Basic Measurements for a self-paced tutorial
On connecting the
logic analyzer:
• “Probing the Device Under Test” on page 33
• Setup Assistant (see the Setup Assistant help volume) (when using
analysis probes).
• Logic Analysis System and Measurement Modules Installation Guide
for probe pinout and circuit diagrams.
On choosing the
sampling mode:
• “Choosing the Sampling Mode” on page 36
• “The Sampling Tab” on page 115
On formatting labels
for probed signals:
• “Formatting Labels for Logic Analyzer Probes” on page 57
• “The Format Tab” on page 119
On defining the
trigger condition:
• “Understanding Logic Analyzer Triggering” on page 192
• “Setting Up Triggers and Running Measurements” on page 64
• “The Trigger Tab” on page 146
On running
measurements:
• “Running Measurements” on page 86
On displaying
captured data:
• “Displaying Captured Data” on page 88
• Using the Waveform Display Tool (see the Waveform Display Tool help
volume)
• Using the Listing Display Tool (see the Listing Display Tool help volume)
• Working with Markers (see the Markers help volume)
• Using the Chart Display Tool (see the Chart Display Tool help volume)
• Using the Distribution Display Tool (see the Distribution Display Tool