Filter
Top Products
1-23
Setting Up the Infiniium DCA
Step 10. Configure the Instrument on a LAN
Step 10. Configure the Instrument on a LAN
You can configure this instrument on a LAN for file sharing and using network
printers. Contact your company’s network administrator to set up your instru-
ment with the appropriate client, protocol, and configuration for your local
area network (LAN). The network setup is different for every company. If you
plan on sharing your instrument hard disk drive with other computers on your
LAN, you should have the network administrator enable file sharing as part of
the network setup. For more information on setting up a network drive, refer
to the built-in information system.