Filter
Top Products
1-18
Setting Up the Infiniium DCA
Step 8. Connect a Printer
Step 8. Connect a Printer
Use of a printer with the Infiniium DCA is optional. Table 1-9 lists the PCL-lan-
guage printers that are currently supported for use with the instrument. To
add a local printer, you must use the Add Printer Wizard to select the printer
driver for the printer as outlined in this procedure; the Add Printer Wizard
does not run automatically. For more information on connecting and using a
printer, refer to the built-in information system. To add a network printer, con-
tact your network administrator.
To connect a printer
1 Turn on the power to the Infiniium DCA.
2 On the File menu, select Print Setup and then Add Printer.
An online Help window opens with instructions for connecting a printer. You
do not need to read the displayed instructions at this time.
Unsupported printers
If your printer is not in the list of supported printers, you will need the printer driver disk
that came with your printer. To install the printer driver from this disk, click Have Disk on
the Add Printer Wizard dialog box. The instrument will then prompt you to put your
printer driver disk into the front-panel disk drive (drive A) or rear-panel CD-Rom drive.
Be sure to install the Windows 98 printer driver for your printer. If a printer driver disk
was not provided or you cannot find the disk, you can contact the printer’s manufacturer
to obtain the appropriate Windows 98 printer driver.
Table 1-9. Supported Printers
HP DeskJet 850 HP DeskJet 1600C
HP DeskJet 890C HP LaserJet 4P
HP DeskJet 970 HP LaserJet 4000N
HP DeskJet 1200C