Filter
Top Products
1-19
Setting Up the Infiniium DCA
Step 8. Connect a Printer
3 Turn the power off the Infiniium DCA. Do not exit the online Help before
turning the instrument off.
4 Connect the printer to the instrument’s rear-panel Parallel port. Refer to
“Rear-panel features” on page 3-6 to locate the Parallel port. Use the cable
that came with your printer.
5 Turn the printer power on.
6 Wait five seconds and then turn the power on the Infiniium DCA again.
7 The following message appears. Touch No.
8 The following message appears. Touch OK.
9 The instrument
automatically recognizes
the printer connected on
the printer port and
displays the Add Printer
Wizard. Touch Next.