A SERVICE OF

logo

68 Xanbus Automatic Generator Start (AGS) Owner’s Guide
Operation of the Xanbus AGS
Returning the AGS to Operating Mode
Use the Xanbus System Control Panel (SCP) to return the AGS to
Operating mode.
Freedom SW System
Home Screen
AGS Settings Menu
From the Freedom
SW System Home
Screen, press Enter.
Use the arrow
buttons to highlight
“Mode”.
Press Enter.
Use the arrow
buttons to highlight
“XAGS”.
Press Enter.
To return the AGS to Operating Mode:
1
Select Device Menu
System Status
BatLev
Load
AC1 1150W 3202V
E--F
1235W
Battery 20.4A 53.9V
Menu
Select Device
FSW3012
EMS
System Settings
XAGS
XAGS 00: Setup
Clear Faults Warnings
View Device Info
[ManualOff]
GenMode
[Standby]
XAGS 00: Setup
Clear Faults Warnings
View Device Info
[ManualOff]
GenMode
Mode
Mode [Operating]
Use the arrow
buttons to change
the setting from
[Standby] to
[Operating].
Press Enter.
2 3